Author: Mohammad Abbasi

Abstract This article discusses “Tensile Testing” as a destructive test to achieve some mechanical properties and behavior of the sampled material. Tensile Testing (Introduction) Tensile Testing that named also tension testing or Ultimate Tensile Strength (UTS) is a kind of...

Abstract This article is mainly about the “Deluge System Testing” which is performed under the presence of the third-party inspection agency inspector to verify the components and system quality according to the standard and technical specifications. Introduction In the previous...

Abstract This article described the “Deluge System Inspection” by third party inspection agency “TPIA” with a focus on the fabrication process. Introduction A deluge Valve is used widely in fixed fire protection systems in the oil and gas, petrochemical, power...

Abstract This article is described the “Liquid Penetrant inspection (LPI)” or “Dye penetrant inspection (DP)”, which is abbreviated generally as “Penetrant Testing (PT)” as an old common method of Non-Destructive Testing “NDT”. You can find the purpose of the test,...

Abstract This article is mainly about “Paint Testing” which is to be applied to industrial products including the common methods under the presence of the third party inspection. You can read “paint inspection – part1” here Paint Testing-Introduction In the...

Abstract This article is mainly about the “Paint inspection” which is to be applied to industrial products including the common methods under the presence of the third-party inspection. Introduction The paint is to be applied on the industrial and non-industrial...

Brief introduction of dry gas seal and related inspections One of the most important components and components of centrifugal compressors that are used in various industries including gas, oil, petrochemical to circulate recycled gas and refineries as condensing and hydrogen...

Abstract This article discusses the “Pipe- during production inspection” and the activities, which are performed by third-party inspection as an independent inspection agency to check the quality and quantity of products during the pipe production. Introduction: “Pipe- during production inspection”...

in the last chapter of this article we talked about welding defects,This article is a continuation of the same article. You can read “Welding defects – Part 1” here Welding definitions of defects – Introduction A defect or discontinuity is...